News Release

Salt Lake Temple Renovation Project Updates: April 2021

In April 2019, President Russell M. Nelson announced plans for the renovation of the Salt Lake Temple. In December 2019, the Salt Lake Temple was or closed for renovation. The following is the latest in a series of regular updates about the progress of the Salt Lake Temple renovation.

16 April 2021

As part of the Salt Lake Temple renovation project, a tunnel is being constructed underneath North Temple to connect the Conference Center parking lot to the underground facilities and entrance to the temple. The tunnel excavation is about 80 percent complete. These photos show the steel arches that are encased in shotcrete (a form of grout) to create the initial lining of the tunnel walls. The steel arches are spaced 4 feet (1.2 meters) apart. The drilling machine is used to remove the upper portion of soil, which is then hauled away by an excavator. This also removes the lower portion of the excavation as shown in the third photo below.

SLC-Temple-UpdateDownload Photo

SLC-Temple-UpdateDownload Photo
SLC-Temple-UpdateDownload Photo

The temple is now surrounded on three sides by a secant wall. The secant walls are installed as close to the bottom edge of the existing footings as possible to contain and brace them in place. The secant wall is built by drilling deep holes where alternating steel and concrete columns are installed. These overlap with each other to create the retaining wall.

SLC-Temple-UpdateDownload Photo

The copper roof sheathing of the temple has been completely removed and replaced with a temporary roof. This is in preparation for the installation of additional steel trusses, an important part of the seismic strengthening of the temple.

The upper stones of the temple walls are being gradually removed to prepare for the structural concrete bonding beams that will brace the walls. The stones that are removed will be reinstalled in their original positions.

SLC-Temple-UpdateDownload Photo

When workers need to access the higher levels of the towers, they use a variety of safety measures, such as mandatory harnesses, to prevent falls. Harnesses are tied to existing hooks anchored in stones.

SLC-Temple-UpdateDownload Photo

As stones are removed from the temple for repair and cleaning, workers ensure they are properly cataloged and labeled so they can be returned to their exact original placement. In this photo, workers help the tower crane operator guide the stone to placement for transportation and storage.

SLC-Temple-UpdateDownload Photo

On the Church Office Building plaza, multiple conveyor belts help carry materials and debris for hauling off-site. The two fountains are being removed, along with walkways and planter boxes. 

SLC-Temple-UpdateDownload Photo

Style Guide Note:When reporting about The Church of Jesus Christ of Latter-day Saints, please use the complete name of the Church in the first reference. For more information on the use of the name of the Church, go to our online Style Guide.